GST NO. : 09AABHD8394P1ZI
Counters With Preset Limit
Leading Manufacturers, Exporters and Wholesaler of 4 Digit Preset Counter, 6 Digit Preset Counter, Model 254D Programmable Digital Counter and Programmable Digital Counter from Ghaziabad.
| Business Type | Manufacturer, Exporter, Supplier |
| Display | 0.56” Red LED 4 digit display for count) |
| Range | 0000 To 9999 |
| Count Inputs | Voltage Pulse: 3V To 30V DC, Potential Free Contact |
| Count Limit | User Settable From 1-9999 |
| Auto Mode | Counter Resets Automatically After Reaching Preset Limit |
| Input Frequency | Up To 1KHz |
| Sensor Supply | +10V DC |
| Battery Back-Up | Retention Of Count On Power Failure Using Internal Rechargeable Ni-Cd Battery |
| Contact Rating | NO-P-NC Contacts @5A/220V AC |
| Size | 96mm X 96mm |
| Mounting | Panel Mounting |
| Supply | Internally Set At 10.5V For Testing 12V Battery |
| Stop | 4 For This Function |
| Operating Temp. | 0-50˚C |
Features
- Input signal suitable for Contact/Make break,Limit switch, Proximity sensor, Photo-electric switch, Infra-red Sensor, Rotary Encoder or any other sensor giving Pulse output.
- Preset Count settable by front pushwheels
- Auto/manual mode user selectable
- For Auto mode, delayed reset time user settable from 1-10sec
- CMOS/LSI design for high reliability and accuracy. No moving parts as in Electromechanical Counters.
- Special de-bounce circuit to prevent spurious counts in slow speed/contact make break
- 12V/75mA DC output for Proximity sensor/Photo sensor
- Built in Ni-Cd rechargeable battery back-up for saving count on power down.
| Business Type | Manufacturer, Exporter, Supplier |
| Display | 6 Digit (0.39 Inch Char Height, Red 7 Seg) |
| Range | 999999 |
| Size | 96 Mm X 96 Mm |
| Count Mode | Up |
| Output | 1 NO-P-NC Change Over Contact 5A/250V AC |
| Reset | PushButton / Contact (Pulse Operation Available) |
| Output Mode | Auto Repetitive Or Single Cycle |
| Power Supply | 230V AC +/- 10% Or 12V DC |
| Operating Temperature | 0 - 50°C |
| Storage Temperature | -10 To +70°C |
Features
- Input signal suitable for Contact/Make break, Limit switch, Proximity sensor, Photo-electric switch, Infra-red Sensor, Rotary Encoder or any other sensor giving Pulse output.
- Preset Count settable by front pushwheels
- Auto/manual mode user selectable
- For Auto mode, delayed reset time user settable from 1-10sec
- CMOS/LSI design for high reliability and accuracy. No moving parts as in Electro-mechanical Counters.
- Reset by Front Push Button or external contact.
- Special de-bounce circuit to prevent spurious counts in slow speed/contact make break.
- 12V/75mA DC output for Proximity sensor/Photo sensor.
- Built in Ni-Cd rechargeable battery back-up for saving count on power down.
| Business Type | Manufacturer, Exporter, Supplier |
| Range | Maximum Count Of 9999 |
| Set Points | Single Set Points Programmable From 1-9999 |
| Batch Limit | Batch Limit Setting From 0 To 999 |
| Operating Modes | A. Auto Mode (Time Settable) B. Manual Mode (Delay Set To Zero) |
| Input Frequency | 0 To 1 KHz |
| Sensor Supply | 10V DC, Short Circuit Protected |
| Multiplying Factor | Programmable From 1-99 |
| Division Factor | Programmable From 1 To 99 |
| Reset Input | A. Front Panel B. Remote Reset By Rear Terminals |
| Relay Outputs | NO-Pole-NC Contact Rated At 5Amp @ 230 V AC |
| Memory Retention | 10 Years |
| Configuration Lock | By Password |
| Mounting | Panel Mounting |
| Size | 96mm X 96mm. Depth 50mm |
| Weight | Approx. 375 Gms. |
| Operating Temp. | 0-50˚C |
| Humidity | 95% RH |
Features
- 4 Digit Preset Counter with separate displays for Count and Set Limit
- Large 0.8” display for count, 0.56”
- Programmable Multiplying and dividing factor.
- Pre-settable Batch Counter
- Up/Down Counting Selectable
- Normal/Auto-Reset with Time setting
- Non-Volatile memory to hold settings and counts
- Password for Program configuration lock
| Business Type | Manufacturer, Exporter, Supplier |
| Display | 6 Digit, 7 Segment LED Display (0.3 |
| Range | Selectable Least Count Of 0.001, 0.01, 0.1, 1. Maximum Count Of 999999 |
| Set Points | Two Set Points Each Programmable From 0.001 To 999999 |
| Batch Limit | Batch Limit Setting From 0 To 999 |
| Operating Modes | A. Auto Mode B. Manual Mode C. No Limit Mode (Event Counter) |
| Input Frequency | A. 0 To 30 Hz B. 0 To 1 KHz |
| Sensor Supply | 10V DC, Short Circuit Protected |
| Scale Factor | Programmable From 0.001 To 999.999 |
| Reset Input | A. Front Panel B. Remote Reset |
| Relay Outputs | Two Relays, One For Each Set Point; 1 C/O (SPDT) Rated At 5Amp @ 230 V AC |
| Memory Retention | 10 Years |
| Configuration Lock | Via Rear DIP-Switch To Avoid Changes In Configured Parameters By Mistake |
| Mounting | Panel Mounting |
| Size | 72mm X 72mm |
| Weight | Approx. 375 Gms. |
| Operating Temp. | 0-50 DegreesC |
| Humidity | 95% RH |
Features
- 6 Digit Preset Counter
- Dual Limits settable with dual relay output
- Programmable Scale Factor of 0.001 to 999.999
- Pre-settable Batch Counter
- Cumulative 6 Digit Counter
- Up/Down Counting Selectable
- Normal/Auto-Reset with Time setting
- Non-Volatile memory to hold settings and counts
- Program configuration lock at rear
- External Setting for Slow/Fast for noiseless operation
